Skip to content
electrician chișinău

Daily 08:00-22:00

We work across Chișinău

Coming soon...

Hob, oven and water heater connection

Hob connection in Chișinău: we run a dedicated circuit from the fuse box, fit a cooker socket or a connection box for the hob’s cable and wire the hob to the maker’s diagram. We connect ovens, water heaters, washing machines and air conditioners the same way, each on its own breaker. The electrician checks the fuse box and gives you the price before starting.

The call-out and diagnosis are free if we do the job.

Leave a request

The data is processed in line with the privacy policy.

Two pots on an electric hob, with a wall socket behind

What we connect

In many older flats the kitchen socket shares a circuit with half the flat and can’t carry an induction hob.

  • A dedicated hob circuit from the fuse box, in 4 or 6 mm² copper cable
  • A cooker socket for an electric or induction hob, or for a freestanding electric cooker
  • Connecting a hob with a 4-core or 5-core cable to a single phase
  • A built-in oven on its own circuit, separate from the hob, with an earthed socket
  • Cable for an electric water heater, with an RCBO
  • A dedicated circuit and an earthed socket for the washing machine or dishwasher
  • A circuit for the air conditioner, brought to where the indoor unit goes
  • A bathroom extractor fan, wired to the light switch or with a timer

We don’t do the water side of a water heater, gas, or an air conditioner’s refrigerant: those are for the plumber, the gas company and the air conditioning installer.

Appliance connection prices

The price depends on the distance from the fuse box to the appliance, on the walls and on whether the box has room for a new breaker. Connecting a hob to a suitable existing circuit costs less than a new circuit. If we do the connection, the call-out and diagnosis are free.

Prices for other jobs

JobPrice
Hob or oven connection to a suitable existing circuitfrom 200 lei
New circuit from the fuse box for a hob, water heater or air conditionerfrom 400 lei
RCD or RCBOfrom 150 lei
Bathroom extractor fanfrom 250 lei

How the connection goes

  1. Reading the label

    The electrician checks the appliance’s power on its label or in the manual and what cable and breaker the kitchen socket has now.

  2. Choosing the route

    He suggests where the new circuit runs: in a chase, in skirting or in trunking, and gives you the price.

  3. Running the circuit

    We fit the breaker and RCD in the fuse box, run copper cable to the appliance and fit the socket or connection box.

  4. Connecting and testing

    We wire the appliance to the maker’s diagram with the earth on its own terminal, run it at full power and check that nothing heats up.

Can a hob go into an ordinary socket?

Usually not. A four-zone induction hob draws up to 7 kW, while an ordinary socket and the 2.5 mm² cable behind it are made for 3.5 kW at most. With all the zones on, the socket heats up, the contacts melt and, at best, the breaker trips. That is why a hob needs its own circuit from the fuse box.

Hobs usually come with a 4-core or 5-core cable, made for two or three phases. In a flat with a single phase, the phase cores are joined with the links on the terminal block, exactly as the diagram in the manual shows. A wrong connection burns the terminal block or leaves zones without power, so the hob is connected by an electrician, with the power off at the fuse box.

If you are renovating the kitchen, decide early where the hob, oven, dishwasher and cooker hood go, and ask for a circuit for each large appliance. The sockets above the worktop come under socket fitting and are done together with the circuits. An electrician in Chișinău can draw up the plan before you order the kitchen units.

Questions people ask

What cable does an electric hob need?

For an induction hob on a single phase we usually use 3×6 mm² copper cable and a 32 A breaker, while smaller hobs can make do with 3×4 mm² and 25 A. We pick the exact size by the power on the label and the length of the circuit. The oven usually has its own circuit in 2.5 mm² cable.

Can the hob and oven share one socket?

Better not. Together they draw up to 10 kW, more than an ordinary cooker socket can carry. They can share one circuit only if the cable and breaker are sized for both, with a connection box for each. It is simpler and safer to give each its own circuit, especially as the hob and oven usually sit next to each other.

Do you fit electric water heaters?

The electrical side, yes: we run the circuit with an RCBO, fit the socket or connection box and connect the water heater. Hanging it on the wall and connecting the water is the plumber’s job, usually done before we come. An 80-litre water heater draws about 2 kW, so on one circuit with the washing machine the breaker may trip.

How is a bathroom extractor fan wired?

Most often we wire it to the light switch, so it comes on with the light. A fan with a timer keeps running for a few minutes after you switch the light off, and one with a humidity sensor switches itself on after a shower. Whichever you choose, the cable runs through a box, and the bathroom circuit must have an RCD.

Bought a new hob or water heater?

Call us or leave a request: the electrician checks the fuse box, tells you which circuit you need and what it costs.

Call an electrician