Skip to content
electrician chișinău

Daily 08:00-22:00

We work across Chișinău

Coming soon...

Rewiring a flat in Chișinău

Rewiring a flat in Chișinău: we take out the old aluminium cable, run new copper cable and fit new boxes, sockets and a new fuse box. We work in studios and in two- and three-room flats, in old blocks and new ones. The electrician looks at the flat, suggests the cable routes and gives you the price before starting.

The call-out and diagnosis are free if we do the job.

Leave a request

The data is processed in line with the privacy policy.

Electrician on a stepladder running cable conduit across a block wall during a renovation

What we replace

We start from what you have now: in many Chișinău blocks the wiring is 40 to 50 years old and made of aluminium.

  • Old aluminium cable, replaced with copper of the right size
  • Separate circuits for the rooms, the kitchen and the bathroom
  • New boxes, sockets and switches, moved to where you need them now
  • A dedicated circuit for the hob, water heater, washing machine or air conditioner
  • A new fuse box with breakers and an RCD
  • Sockets with an earth contact, wired back to the fuse box
  • New points for chandeliers, spotlights or LED strips

We don’t work on the building’s riser or on the meter: those are for Premier Energy Distribution or the homeowners’ association.

Rewiring prices

The final price depends on the number of points, the metres of chasing and the walls: concrete is slower to chase than brick or plasterboard. If we do the rewire, the call-out and diagnosis are free.

Prices for other jobs

JobPrice
New wiring, one roomfrom 2 000 lei
New point: chase, box and cablefrom 200 lei
Wall chase for a cablefrom 30 lei/m
New fuse box, fitted and wiredfrom 600 lei

How a rewire goes

  1. We look at the flat

    The electrician comes, checks the old wiring and the fuse box and notes where you want sockets, lights and new circuits.

  2. The plan and the price

    He suggests the cable routes and the number of points, then gives you the price. We work out the cable and boxes on the spot.

  3. Chases and new cable

    We cut the chases and run the copper cable in straight lines, horizontal and vertical, so that later you know where not to drill.

  4. Fuse box and testing

    We fit the fuse box, connect each circuit to its own breaker and test every point with a meter before the chases are closed.

  5. You keep the plan

    At the end you get a plan: which breaker serves which room and where the cables run.

A full rewire or one room at a time?

If the wiring is aluminium, the breaker trips often and the sockets get warm, a full rewire is safer and, in the end, cheaper than repeated repairs. Old aluminium snaps when bent and oxidises at the joints, and that is where short circuits start.

If you are renovating only one room or the kitchen, the wiring can be replaced in stages: a new circuit from the fuse box to that room. The other rooms stay on the old wiring until their turn comes. The electrician tells you which option fits once he has seen the fuse box and the junction boxes.

In panel blocks, the old cable often runs through channels in the concrete. Sometimes the new cable can be pulled through the same channels without new chases; sometimes the channel is blocked and a new route is needed. If you are not sure what state the wiring is in, have an electrician in Chișinău check it before the renovation, so you know early whether chases are needed.

Questions people ask

How long does it take to rewire a flat?

A studio usually takes 2-3 days, a two-room flat 3-4 days and a three-room flat up to a week. It depends on the walls and on how many new points you want. If you live in the flat while we work, we leave at least one socket and the lights working each evening.

Do we need to move the furniture and redecorate afterwards?

Furniture along the walls that get chases has to be moved. We fill the chases with plaster, but the walls then need skimming and paint, so rewiring is best done before a renovation. If you want no chases, part of the cable can run in skirting or in surface trunking.

Which cable do you use: copper or aluminium?

Copper only. For lighting we usually use 1.5 mm² cable, for sockets 2.5 mm², and for a hob or water heater we size it to the appliance. We no longer fit aluminium: it heats up at the joints and breaks easily.

Can a flat be rewired without cutting into the walls?

Partly. In blocks with concrete channels, the new cable can sometimes be pulled through the old channels. Elsewhere, surface trunking or skirting with a channel can be used. New sockets in new places usually need a chase. The electrician tells you what is possible once he has checked the routes.

Want to rewire your flat?

Call us or leave a request: tell us how many rooms the flat has and whether a renovation is coming, and the electrician comes to see it.

Call an electrician