Skip to content
electrician chișinău

Daily 08:00-22:00

We work across Chișinău

Coming soon...

House wiring in Chișinău

House wiring in Chișinău: we run copper cable through a new house before plastering, or rewire an older house you live in. We do the circuits for each room, the fuse box, the earthing and the yard lights, out to the garage and summer kitchen. You get the price before any work starts, once the electrician has seen the house and drawn the plan of points with you.

The call-out and diagnosis are free if we do the job.

Leave a request

The data is processed in line with the privacy policy.

Socket back boxes set into a plastered wall, with the cable run up to them

What we do in a house

In a new house we start from the room plan. In an old one we start from what is there now: often aluminium, screw-in fuses and no earth.

  • A plan of points and circuits for each floor, before plastering
  • Copper cable in conduit, with separate circuits for rooms, kitchen and bathroom
  • Dedicated circuits for the water heater, water pump, hob and air conditioner
  • A fuse box with breakers, an RCD and a voltage relay
  • Earthing with rods driven into the yard, wired to the fuse box
  • Buried cable out to the garage, summer kitchen or gate
  • Outdoor lighting for the house and yard, with motion-sensor floodlights
  • Electric underfloor heating in the bathroom, kitchen or hall

Connecting the house to the grid, the cable from the pole to the meter and the meter itself belong to Premier Energy Distribution, and we don’t work on them.

House wiring prices

The final price depends on the number of points and rooms, the metres of cable out to the outbuildings and whether the walls are already plastered. If we do the wiring, the call-out and diagnosis are free.

Prices for other jobs

JobPrice
New wiring, one roomfrom 2 000 lei
New fuse box, fitted and wiredfrom 600 lei
House earthing with electrodesfrom 2 000 lei
Ceiling or wall light fittingfrom 150 lei

How a house job goes

  1. We look at the house

    The electrician comes, looks at the rooms, the fuse box and the meter, and notes the big appliances you have or plan: water heater, pump, hob, air conditioner.

  2. The plan and the price

    We draw the plan together: where the sockets, ceiling lights and yard lights go and which circuits leave the fuse box. Then you get the price.

  3. Routes and cable

    In an unfinished house we lay the cable in conduit before plastering. In a lived-in house we use the old routes or surface trunking where we can.

  4. Fuse box and tests

    We connect each circuit to its own breaker, test the cable insulation and the earth resistance, and check that the RCD trips.

  5. You keep the plan

    You get a plan of the house with the cable routes: where not to drill and which breaker switches off each room or outbuilding.

An old house: rewire or repair?

In older houses the wiring is often aluminium, run on the surface or straight into the plaster, with screw-in fuses and no earth. If the breaker trips often, the sockets get warm or the lights flicker when the water heater comes on, a full rewire is safer than patching it piece by piece. The old wire was never meant for today’s appliances.

If the wiring is copper and in good condition, it can stay: we replace the fuse box, add an RCD and earthing, and run new circuits only for the big appliances. The electrician tests the cable insulation and tells you what can be kept and what needs replacing.

Plan the outdoor lighting together with the wiring: a motion-sensor floodlight over the gate, wall lights by the door and a buried cable to the garage are far easier to lay before the yard is paved. If you are not sure what state the house wiring is in, have an electrician in Chișinău check it before you renovate.

Questions people ask

How much does wiring a 100 m² house cost?

The price is counted by points and circuits, not by square metres. Two houses of the same size can have very different numbers of points, depending on how many sockets, lights and big appliances you want. The electrician draws the plan with you, counts the points and gives you the price before starting.

Do I need a wiring design for a house?

For the wiring inside the house we draw you a plan: where the points are, which circuits leave the fuse box and which breaker each one has. Connecting a new house to the grid or raising the power limit goes through Premier Energy Distribution, and they tell you which documents they need. Everything after the meter we do ourselves.

Single-phase or three-phase: which does a house need?

It depends on your contract with Premier Energy Distribution and on your appliances. A house with a water heater, hob and air conditioner usually manages on single-phase. Three-phase makes sense if you heat the house with electricity or have a sauna or a workshop with three-phase motors. You apply to Premier Energy Distribution for the change, then we do the fuse box and circuits.

How do I get power to the garage or summer kitchen?

With a separate circuit from the fuse box, on its own breaker. We bury copper cable in conduit about 70 cm deep, under the paving or along the path, or run it overhead on a steel wire if the distance is long. The outbuilding gets its own small fuse box, so a fault there doesn’t cut power to the whole house.

Building a house or rewiring one?

Call us or leave a request: tell us how many floors the house has and which big appliances you plan, and the electrician comes to see it.

Call an electrician