Skip to content
electrician chișinău

Daily 08:00-22:00

We work across Chișinău

Coming soon...

Sockets and switches in Chișinău

Sockets and switches in Chișinău: we replace old sockets, fit double sockets with an earth, move sockets and switches to where you need them now and add new ones in the kitchen and bathroom. The electrician checks the back box and the wires, gives you the price for each point and only then starts.

The call-out and diagnosis are free if we do the job.

Leave a request

The data is processed in line with the privacy policy.

A hand tightening a double socket with a screwdriver

What we fit and replace

It usually starts with a socket that wobbles in the wall, gets warm or no longer grips the plug, or with a new kitchen full of appliances.

  • Replacing a socket or switch in the existing box, with a new mechanism
  • A double socket with an earth, if an earth wire reaches the box
  • A single, double or two-way switch for a hall or bedroom
  • Moving a socket to a new spot: chase, new box and cable
  • Kitchen sockets above the worktop and for the fridge, hood and dishwasher
  • A new back box when the old one is cracked, too small or loose
  • TV and internet sockets by the television or the desk
  • A socket for a hob or oven on a new circuit from the fuse box

The internet or TV cable up to the flat is run by the provider, Moldtelecom, Starnet or another; we fit the socket and the cable inside.

Socket and switch prices

The price is per point: a socket swapped in an old box costs less than one moved with a chase and new cable. The wall matters too: concrete is slower to chase than brick or plasterboard. If we fit the sockets, the call-out and diagnosis are free.

Prices for other jobs

JobPrice
Socket or switch in an existing boxfrom 100 lei
New point: chase, box and cablefrom 200 lei
Wall chase for a cablefrom 30 lei/m
New circuit from the fuse box for a hob, water heater or air conditionerfrom 400 lei

How a new socket goes in

  1. Tell us what you need

    Tell us how many sockets and switches you want and where. A photo of the wall and the fuse box helps us bring the right boxes and cable.

  2. We check the wires

    The electrician switches off the breaker, checks with a tester that there is no voltage, and sees whether the wires are copper or aluminium and whether there is an earth.

  3. Chase and new box

    For a new point we cut the chase, set the box in plaster flush with the wall and run the cable from the nearest junction box or the fuse box.

  4. Fitting and testing

    We fit the mechanism and frame straight, test the voltage and the earth contact, and show you that each socket and switch works.

How many kitchen sockets, and where?

In a kitchen, sockets go above the worktop, usually 10-20 cm over it, with a double socket at each work spot: kettle, coffee machine, food processor. The fridge, dishwasher and oven need sockets low down behind the units, and the hood needs one up high, above the wall cupboards. We don’t put sockets straight above the sink or the hob.

An electric hob, oven or water heater isn’t plugged into an ordinary socket: each gets a dedicated circuit with its own breaker, and connecting an electric hob is usually done directly, without a plug. If you draw the kitchen with its units before the renovation, the electrician can tell you exactly where each socket goes.

A double socket with an earth contact only makes sense if an earth wire reaches the box. In many old blocks there isn’t one, and the earth contact on the socket ends up connected to nothing; the neutral must never be used in its place. If you don’t know what wires you have, an electrician in Chișinău can test them before you buy the sockets.

Questions people ask

Can a socket be moved without chasing the wall?

Yes, in a few ways. The cable can run in surface trunking or in skirting with a channel, and the socket sits in a surface-mounted box. In plasterboard walls the cable runs behind the board with no chase. If you want the socket flush in a concrete or brick wall, a chase is needed.

Why is my socket warm or smelling of burning?

Usually a poor contact: the wire has worked loose in the mechanism, the aluminium has oxidised, or the socket is old and no longer grips the plug. Sometimes too much is plugged into one socket, such as a heater and a kettle together. Switch off the breaker, stop using the socket and call us: we replace the mechanism and check the wires in the box.

What kind of socket goes in a bathroom?

A socket with a lid and splash protection, IP44, far enough from the bath or shower that water can’t reach it. We put the bathroom sockets on a 30 mA RCD, which cuts the power if current leaks. The washing machine gets its own socket with an earth.

Will you fit sockets I bought myself?

Yes, we fit sockets and switches of any make, modular ones included: Schneider, Legrand, Gewiss, Viko and the others sold in local shops. Just check that the mechanism fits the round 68 mm box found in most walls. If you haven’t bought them yet, the electrician tells you what to get.

Need new sockets or a socket moved?

Call us or leave a request: tell us how many sockets you need and where, and the electrician comes with the right boxes and cable.

Call an electrician