Skip to content
electrician chișinău

Daily 08:00-22:00

We work across Chișinău

Coming soon...

Spotlights and LED strips in Chișinău

Spotlights and LED strips in Chișinău: we set LED spotlights into stretch and plasterboard ceilings, fit spotlight tracks and run LED strips on ceilings, under kitchen cupboards, in bathrooms and on slatted panels. We lay the cables before the ceiling, wire the power supplies and split the light into groups. The electrician draws the layout with you and gives you the price first.

The call-out and diagnosis are free if we do the job.

Leave a request

The data is processed in line with the privacy policy.

A living room with LED light lines set into the ceiling

What we fit on ceilings and units

The best time to call us is before the stretch ceiling or plasterboard goes up: then the cable reaches each spotlight easily.

  • Recessed spotlights in plasterboard ceilings, with holes cut by a hole saw
  • Spotlights for stretch ceilings, on rings and mounts fitted before stretching
  • Spotlight tracks, surface-mounted or set into the ceiling
  • LED strip on the ceiling, in an aluminium profile or a cove
  • LED strip in the kitchen, under the wall cupboards above the worktop
  • Waterproof LED strip in the bathroom, with the power supply outside the wet zone
  • LED strip on slatted panels, on stairs or behind the television
  • Light lines in a stretch ceiling, with a profile and LED strip

The stretch ceiling and the profiles for light lines are fitted by the ceiling company; we prepare the cables, fit the lights and wire them up.

Spotlight and LED strip prices

The final price depends on the number of spotlights, the metres of strip and how many groups and power supplies need wiring. If the cable has to go through a concrete wall, the chase is added. If we fit the lights, the call-out and diagnosis are free.

Prices for other jobs

JobPrice
Recessed ceiling spotlightfrom 50 lei each
LED strip with power supplyfrom 70 lei/m
New point: chase, box and cablefrom 200 lei
Wall chase for a cablefrom 30 lei/m

How the spotlights go in

  1. The layout

    We mark on the room plan where the spotlights and strips go, which group each switch button turns on and where the power supplies sit.

  2. Cables before the ceiling

    While the ceiling is still open, we run a cable to each spotlight and to the power supply spot, and leave the ends labelled.

  3. Holes and fitting

    In plasterboard we cut the holes with a hole saw to the spotlight’s size; in a stretch ceiling we cut only inside the rings the ceiling company glued on.

  4. Wiring and testing

    We connect the spotlights and power supplies, test each group and angle the adjustable spotlights so the light falls where it should.

Where does the LED strip’s power supply go?

A 12 V or 24 V LED strip runs from a power supply, which gets warm and can fail over time. So we never seal it into the ceiling: it goes in a cove, a cupboard or a large ventilated box where it can be reached. If a 12 V strip is longer than 5 m, we feed it from both ends, or it gets dimmer towards the far end.

Spotlights usually go 50-60 cm from the wall and 1-1.5 m apart, so the light is even, without patches. In a large room we split them into two groups on a double switch. If you also want a chandelier in the middle, decide its spot together with the spotlights; the chandelier fitting then goes on the mount left under the ceiling.

All of this is prepared with the wiring, before the ceiling goes up: once the ceiling is finished, a new cable is hard to run. If you are rewiring the flat, tell us early how many spotlights you want. And if you are unsure which ceiling to choose or how much light you need, an electrician in Chișinău can help you draw the layout.

Questions people ask

Can spotlights go into a stretch ceiling that’s already up?

Yes, if the ceiling company left rings and a cable for each spotlight. Without a ring the film must not be cut: it can split, and it can’t be patched. If the ceiling is finished with nothing prepared, the ceiling company takes part of it down, and we run the cables and fit the spotlights.

Should I choose 12 V or 24 V LED strip?

For a short run, under cupboards or in a niche, 12 V is enough. For ceilings and long lines 24 V strip is better: over the same length it dims less towards the end, and the power supply can sit further away. We choose a power supply with about 20-30% spare capacity so it doesn’t run at its limit.

Can an LED strip go in a bathroom?

Yes, but use a waterproof strip, IP65 or higher near the shower, with the power supply outside the bathroom or in a dry place away from splashes. We put the bathroom circuit on a 30 mA RCD. A 12 V or 24 V strip is safer here than a 220 V one.

How many spotlights does a room need?

It depends on the spotlights and the ceiling height, but as a guide a 15-18 m² room usually takes 8-12 LED spotlights, 1-1.5 m apart. Above a kitchen worktop you need more light, in a bedroom less. The electrician draws the layout on the room plan so you can see it in advance.

Want spotlights or an LED strip on the ceiling?

Call us or leave a request: the electrician looks at the ceiling and draws the lighting layout with you, ideally before the ceiling goes up.

Call an electrician