Skip to content
electrician chișinău

Daily 08:00-22:00

We work across Chișinău

Coming soon...

House earthing with earth rods

House earthing in Chișinău: we drive vertical earth rods into the yard, join them with a steel strip and bring the earth into the fuse box. From there the earth wire goes to every socket, the water heater, the hob and the washing machine. At the end we measure the earth resistance. The electrician gives you the price before starting.

The call-out and diagnosis are free if we do the job.

Leave a request

The data is processed in line with the privacy policy.

An electrician checking a fuse box with green-and-yellow earth wires

What the job includes

In many Chișinău houses the sockets have an earth contact, but the wire from it leads nowhere or is joined to the neutral.

  • Vertical earth rods: usually three rods driven in a triangle, at least a metre from the foundations
  • One deep rod made of joined sections, where the yard is small or concreted
  • A steel strip in a trench to the house wall, and a conductor to the fuse box
  • An earth bar in the fuse box, with a green-and-yellow wire to each circuit
  • Double sockets with earth, wired back to the fuse box
  • Earthing for the water heater, hob, washing machine and a metal bathtub
  • Measuring the earth resistance, and one more rod if it comes out too high

In flats we don’t drive rods: the earth wire can only come from the building’s fuse board, and only if the building has one.

House earthing prices

The price of house earthing depends on how many rods are needed, how hard the ground is and how far the rods are from the fuse box. If we do the earthing, the call-out and diagnosis are free.

Prices for other jobs

JobPrice
House earthing with electrodesfrom 2 000 lei
RCD or RCBOfrom 150 lei
Socket or switch in an existing boxfrom 100 lei
New fuse box, fitted and wiredfrom 600 lei

How earthing goes

  1. Choosing the spot

    The electrician looks at the yard and the fuse box and picks the spot for the rods: at least a metre from the foundations, away from pipes and buried cables.

  2. The plan and the price

    He tells you how many rods are needed, where the strip runs and which sockets get an earth, then gives you the price.

  3. Driving the rods

    We dig a trench about half a metre deep, drive the rods, weld them to the strip and run it to the house wall.

  4. Connecting the fuse box

    We bring the conductor to the earth bar in the fuse box and from there connect the green-and-yellow wire to the sockets and appliances.

  5. Testing the resistance

    We measure the earth resistance with a meter. If it is too high, we drive one more rod, then fill in the trench.

What happens without an earth wire?

When the insulation inside an appliance fails, its metal case becomes live. With an earth, the current flows away through the green-and-yellow wire and the breaker or RCD cuts the circuit at once. Without one, the case of the water heater, washing machine or hob stays live until someone touches it, often with wet hands, in the bathroom or kitchen.

Never connect a socket’s earth contact to the neutral, a water pipe or a radiator. If the neutral breaks or the wires are swapped, a link to the neutral makes the case live, and through a pipe the current can reach the neighbours. Earthing is done with rods in the ground, and until you have it, a 30 mA RCD protects you.

In a new house, earthing is done together with the house wiring, before the fuse box goes in. In an older house, earth rods can be added at any time without breaking walls: only the wire to the sockets sometimes needs chases or trunking. If you are not sure whether your sockets are earthed, have an electrician in Chișinău check them.

Questions people ask

How do you earth a socket in a flat?

It depends on the block. In new blocks a third wire, the earth, comes from the fuse board, and we run it to every socket. In old blocks the riser has only two wires, so there is no real earth. There we fit a 30 mA RCD and connect the earth contact only if the building has an earth wire on the landing.

How many earth rods does a house need?

Three rods in a triangle are usually enough for a house. In dry or stony ground in some yards the resistance comes out too high, and then we add one or two rods or drive a deep one. The exact number is known only after the measurement, so the electrician tells you in advance what each extra rod costs.

How long does house earthing take?

Usually one day: we dig the trench, drive the rods, weld them and connect the conductor to the fuse box. If the sockets in the house have no earth wire and it has to be run, it takes another day or two, depending on the number of sockets and whether chases are needed. The power is off only while we work in the fuse box.

Do I buy the earthing kit, or do you bring it?

Whichever suits you. Earthing kits with rods, couplers and strip are sold in electrical shops in Chișinău. The electrician sends you on Viber, WhatsApp or Telegram what to buy and how many, or we bring the kit with a receipt. The conductor to the fuse box and the earth bar go on the same list of materials.

Want your house earthed?

Call us or leave a request: the electrician looks at the yard and fuse box, tells you how many rods you need and what it costs.

Call an electrician